Aerials and Accessories
Transmitters operate on UHF frequencies which incur high power losses in the antenna feeder cable. Always use quality 50 OHM coaxial cable. We recommend RG213, or better, for lengths up to about 15 metres. Longer runs should be avoided if possible. Use only high quality solder-fit connectors. Pre-terminated feeder cable is available in this section as well as aerials, programming kits and more.Showing 36 of 36 Products
For use with Scope 500mW paging transmitters only.
£288.00
Features strobe, multiple alert outputs and USB.
£172.00
5 metre RG58 pre-terminated cable for amplifier
£0.00
For configuring serial ports, dry-contacts and optional telephone interface.
£44.00
Connex page additional user for NET version
£75.00
NET (Ethernet) version, first user. For CX4E or CX5E
£139.00
Communicate with a transmitter connected to a serial port on the host PC
£139.00
With USB cable for CX4U or CX5U (single user only)
£139.00
Replacement aerial assembly for DataPage
£15.50
External use with wall mounting bracket and 10 metre RG213 cable
£167.45
For external use with wall bracket and 10 metre cable SMA fitting
£167.45
External use with wall mounting bracket and 15 metre RG213 cable
£172.45
External use with wall mounting bracket and 5 metre RG58 cable
£144.90
10 metre RG213 pre-terminated cable for amplifier
£52.50
15 metre RG213 pre-terminated cable for amplifier
£58.00
Internal use, with 5 metre feeder (approx)
£39.00
Internal use, with 5 metre feeder cable (approx) for amplifier
£40.00
Wall mount with approx. 5 metre cable. Inc. gland for PageTek Pro
£45.00
With approx 3 metre cable for difficult sites
£39.00
Replacement plugtop PSU for DataPage
£22.00
Consisting of PC software and serial cable
£17.00
