C-Tec 800 Series


Nursecall 800 is a Conventional NurseCall system speciffically designed for the smaller care home.  Resident calls present themselves on a rectangular box display, illuminating the room or area requiring assistance.  The label to the right of the light is normally completed indicating the location.  Two levels of call can be provided, resident - staff and staff - staff and repeater displays can be installed, normally one per floor.  The system can accept remote call leads, ceiling pullcords and door monitoring units, and is normally used in environments up to twenty call devices.  For larger applications the user friendly and descrete Quantec system is normally prefered
Showing  41  of  41  Products
10 Zone Expansion Unit for NC910F or NC920F
214 W x 178 H x 70 D mm (overall). Hole required for flush mounting is 176 W x 162 H x 55 D mm.
£150.00
10 Zone Expansion Unit for NC910S or NC920S
214 W x 178 H x 70 D mm. Surface mounting.
£155.00
10 Zone Master Call Controller c/w 300mA PSU (Flush Version)
214 W x 178 H x 70 D mm (overall). Hole required for flush mounting is 176 W x 162 H x 55 D mm.
£185.00
12V 1A Regulated Power Supply
A general purpose mains to regulated 12V d.c. power supply unit ideal for use in access control, CCTV, security and accessible toilet alarm applications.
£69.60
20 Zone Expansion Unit for NC910F or NC920F
214 W x 178 H x 70 D mm (overall). Hole required for flush mounting is 176 W x 162 H x 55 D mm.
£180.00
20 Zone Expansion Unit for NC910S or NC920S
214 W x 178 H x 70 D mm. Surface mounting.
£185.00
20 Zone Master Call Controller c/w 300mA PSU (Flush Version)
214 W x 178 H x 70 D mm (overall). Hole required for flush mounting is 176 W x 162 H x 55 D mm.
£250.00
BF360-12 12V 2A BOXED EN54-4 PSU
Space for 1 x 12V 7Ah standby battery
£138.08
NC809DB/SS BUTTON RESET POINT STAINLESS STEEL
Stainless steel button reset point
£48.07
NC809DM Magnetic Reset Point
Can be used to remotely and securely cancel standard calls generated from ceiling pulls and/or wall call points that are wired on the same zone.  
£9.77
NC894DKM Isolatable Monitoring Point, Magnetic Reset
Typical uses include monitoring fire exits, drug cupboards, store rooms, etc.
£31.45
NC899IRR Keyswitch Reset Point
A secure keyswitch-operated reset point specifically designed to cancel Emergency calls generated by an NC312RXC master infrared ceiling receiver.
£28.35
NC917L Standard Call Push with Protruding Button, No Reset, No Remote
Requires a separate reset point for cancelling calls.
£19.17
ZMBOXAL ALIGNMENT PLATE - VERTICAL
Alignment plate for connecting two call controllers vertically
£12.70
ZMBOXAS ALLIGNMENT PLATE - HORIZONTAL
Alignment plate for connecting two call controllers horizontally
£12.70